Construction technology and method of floor paint_Hubei Bestway New Material Co., Ltd. All Right Reserved.



language 

中国

韩国



English

中文版

NEWS

Show information Industry information Company information Phenalkamine hardeners Epoxy Accelerator DMP-30 Modified Polyetheramine hardener Aromatic AMine Hardeners Epoxy Reactive Diluents Polyamide hardeners

Check category



Homepage

/

News

/

Show information

/

Construction technology and method of floor paint

Data： 2022-05-26 11:01

Construction technology and method of floor paint

(1) Base treatment: Grind off the loose layer, delamination and cement residue to make it hard and smooth, and increase the adhesion between the floor coating and the ground.

(2) Primer construction: After the epoxy sealing primer is prepared, roll, scrape or brush to fully wet the concrete and penetrate into the inner layer of the concrete.

(3) Construction of the middle coating: Mix the middle coating material with an appropriate amount of quartz sand and stir evenly, and use a trowel to trowel to form a flat and dense layer of a certain thickness.

(4) Top coat patching: use top coat material and quartz fine powder for batch coating to fill the gaps between the larger particles of the middle coat. After it is completely cured, use a dust-free sander to polish the ground, and use a vacuum cleaner to absorb dust and smoothen it. .

(5) Top coating construction: After mixing the epoxy paint and curing agent evenly, it can be troweled, brushed, rolled or sprayed to make it level and obtain a smooth and even surface coating.